The H3 features a two-speed, electronically controlled full-time four-wheel drive system that is suitable for both on-road and off-road driving in all conditions, with electronic locking front and rear differentials optionally available. Like its larger sibling H2 H3 can ford 24 inches (610 mm) of water (tested in depths up to 31 in/790 mm) at a speed of 5 miles per hour (8.0 km/h) and 16 inches (410 mm) of water at a speed of 20 miles per hour (32 km/h). Standard ground clearance is measured at 9.7 inches (250 mm) while the approach, departure, and breakover angles are measured at 37.4°, 34.7°, and 22.1° respectively, allowing the H3 to scale a 16-inch (410 mm) vertical wall and negotiate grades of 60% and side slopes of 40%. Though fore and aft recovery hooks are standard, a trailer hitch and wiring harness are optional.
This entry was posted on Monday, April 12, 2010 at 1:09 AM. You can follow any responses to this entry through the RSS 2.0. You can leave a response.
The H3 features a two-speed, electronically controlled full-time four-wheel drive system that is suitable for both on-road and off-road driving in all conditions, with electronic locking front and rear differentials optionally available. Like its larger sibling H2 H3 can ford 24 inches (610 mm) of water (tested in depths up to 31 in/790 mm) at a speed of 5 miles per hour (8.0 km/h) and 16 inches (410 mm) of water at a speed of 20 miles per hour (32 km/h). Standard ground clearance is measured at 9.7 inches (250 mm) while the approach, departure, and breakover angles are measured at 37.4°, 34.7°, and 22.1° respectively, allowing the H3 to scale a 16-inch (410 mm) vertical wall and negotiate grades of 60% and side slopes of 40%. Though fore and aft recovery hooks are standard, a trailer hitch and wiring harness are optional.
